Skip to content

Care & Installation

How to Seal Granite, Marble and Quartzite: When, How Often and What to Avoid

By Belnexa · · Updated · 1 min read

Quick answer

Test with water: if the stone darkens within minutes, seal it. Clean, dry the surface, apply an impregnating sealer, wipe off the excess and let it cure. Marble and light stones usually need sealing more often than dark granite.

Does natural stone need sealing?

Most natural stone is slightly porous. A sealer slows liquids from soaking in, giving you time to wipe spills. It does not make stone stain-proof, and it does not stop acids from etching marble.

The water test

Place a few drops of water on the surface. If they bead, the stone is protected. If they darken the stone within 10 to 15 minutes, the surface needs sealing.

How to apply a sealer

  1. Clean with a pH-neutral stone cleaner and let it dry fully.
  2. Apply an impregnating sealer with a clean cloth or applicator.
  3. Leave it for the time on the label, then wipe off all excess.
  4. Allow the full cure time before heavy use.

How often?

Follow the product label. Light marble and quartzite in kitchens are checked more often than dark granite. Repeat the water test once or twice a year.

What to avoid

  • Acidic or bleach-based cleaners on marble.
  • Abrasive pads.
  • Leaving red wine, oil or coffee sitting overnight.

Frequently asked questions

Does engineered quartz need sealing?

No. Engineered quartz is non-porous and should not need a sealer.

Can sealing stop etching on marble?

No. Etching is a chemical reaction with acid, not a stain, so a sealer will not prevent it.

Keep reading

More guides

Specify Belnexa for your next project

Request a physical sample kit and experience the colour, depth and calibrated precision of our surfaces.

Reply within one working day. No spam – your details are used only for your enquiry.